Anycubic Mega X vs Artillery Sidewinder X1 SW-X1 v4
When you compare the Anycubic Mega X to the Artillery Sidewinder X1 SW-X1 v4 you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Specs comparison between the two Printers
| Anycubic Mega X | Artillery Sidewinder X1 SW-X1 v4 | |
|---|---|---|
| Overview | ||
| Extruder Type | Bowden | direct drive |
| Print Technology | Fused Deposition Modeling | |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | 1.75 mm |
| Build Plate Material | Ultrabase glass | Ceramic Glass |
| Max Power Consumption | 350 W | 600 W |
| Build Area | 300 mm x 300 mm x 305 mm | 300 mm x 300 mm x 400 mm |
| Build Plate Attachment | clamp | fixed |
| Ambient Operating Temperature | 8°C - 40°C | 10°C - 50°C |
| Internal Memory | ||
| Max. Nozzle Temperature | 250 ºC | 240 ºC |
| Build Volume | 300 mm x 300 mm x 305 mm | |
| Number of Extruders | 1 | 1 |
| Build Plate Leveling System | manual Leveling | manual Leveling |
| Build Plate Surface | Ultrabase Glass | |
| Open Filament System | Yes | Yes |
| Max Build Plate Temperature | 90 ºC | 130 ºC |
| Layer Height | 0.05 - 0.3 mm | 0.05 - 0.32 mm |
| Usable Nozzle Type | RepRap M6 1,75mm | Volcano |
| Total Mass Overall Dimensions | 500 mm x 500 mm x 553 mm | 550 mm x 405 mm x 640 mm |
| Resolution | 50 - 300 µm, 0.01 mm | |
| Build Chamber During Process | open | open |
| Max Recommended Printing Speed | 60 mm/s, 100 mm/s | 150 mm/s |
| Connectivity | ||
| USB Port | Yes | Yes |
| WLAN | No | No |
| Features | ||
| Touchscreen | No, Yes | Yes |
| Hepa Filter | No | No |
| SD Card | Yes,SD-Card, Yes,SD-Card | Yes,micro-SD |
| Filament Runout Sensor | Yes | Yes |
| Powerloss Fail Safe | Yes | Yes |
| System | ||
| Weight | 19 kg, 14 kg | 12.4 kg |
| Dimensions | 500 mm x 500 mm x 553 mm | 550 mm x 405 mm x 640 mm |
| Voltage | AC: 110 V / 230 V (50/60 Hz) | AC: 100 V - 230 V (50-60 Hz) |
| Total Weight | 19 kg, 14 kg | 12.4 kg |