Anycubic Mega S vs DWS XPRO S
When you compare the Anycubic Mega S to the DWS XPRO S you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Specs comparison between the two Printers
| Anycubic Mega S | DWS XPRO S | |
|---|---|---|
| Overview | ||
| Extruder Type | Bowden | |
| Print Technology | Fused Deposition Modeling | Laser Stereolithography |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | |
| Max Power Consumption | 500 W | |
| Build Area | 210 mm x 210 mm x 205 mm | 300 mm x 300 mm x 300 mm |
| Ambient Operating Temperature | 8°C - 40°C | 20°C - 25°C |
| Resin UV Light Type | Solid State BlueEdge | |
| Max. Nozzle Temperature | 275 ºC | |
| Build Volume | 210 mm x 210 mm x 205 mm | |
| Number of Extruders | 1 | |
| Build Plate Leveling System | manual Leveling | |
| Open Filament System | Yes | |
| Max Build Plate Temperature | 100 ºC | |
| Layer Height | 0.1 - 0.4 mm | 0.01 - 0.1 mm |
| Total Mass Overall Dimensions | 410 mm x 405 mm x 452 mm | 704 mm x 1446 mm x 2048 mm |
| Build Chamber During Process | open | closed |
| Max Recommended Printing Speed | 60 mm/s | |
| Connectivity | ||
| USB Port | Yes | Yes |
| Ethernet Port | Yes | |
| Features | ||
| Touchscreen | Yes | No |
| Hepa Filter | No | No |
| SD Card | Yes,SD-Card | |
| Filament Runout Sensor | Yes | |
| Powerloss Fail Safe | Yes | |
| System | ||
| Weight | 14.4 kg | 500 kg |
| Dimensions | 410 mm x 405 mm x 452 mm | 704 mm x 1446 mm x 2048 mm |
| Voltage | AC: 110 V - 220 V, (50 / 60 Hz) | AC: 230 V, (50 Hz) |
| Total Weight | 14.4 kg | 500 kg |