Anycubic Mega S vs Creality Ender 5 S1
When you compare the Anycubic Mega S to the Creality Ender 5 S1 you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Specs comparison between the two Printers
| Anycubic Mega S | Creality Ender 5 S1 | |
|---|---|---|
| Overview | ||
| Extruder Type | Bowden | direct |
| Print Technology | Fused Deposition Modeling | Fused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM) |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | 1.75 mm |
| Build Plate Material | Steel | |
| Max Power Consumption | 350 W | |
| Build Area | 210 mm x 210 mm x 205 mm | 220 mm x 220 mm x 280 mm |
| Build Plate Attachment | magnetic | |
| Ambient Operating Temperature | 8°C - 40°C | |
| Max. Nozzle Temperature | 275 ºC | 572°F / 300°C |
| Build Volume | 210 mm x 210 mm x 205 mm | 8.7 x 8.7 x 11" / 22.0 x 22 x 28.0 cm (1 Extruder) |
| Number of Extruders | 1 | 1 |
| Build Plate Leveling System | manual Leveling | Automatic Bed Leveling |
| Open Filament System | Yes | |
| Max Build Plate Temperature | 100 ºC | 230°F / 110°C |
| Layer Height | 0.1 - 0.4 mm | 50 to 350 micron / 0.05 to 0.35 mm |
| Usable Nozzle Type | 400 micron / 0.4 mm (Included) | |
| Total Mass Overall Dimensions | 410 mm x 405 mm x 452 mm | |
| Build Chamber During Process | open | Open |
| Max Recommended Printing Speed | 60 mm/s | 250 mm/s |
| Connectivity | ||
| Cloud Control | Yes | |
| USB Port | Yes | Yes |
| WLAN | Yes | |
| Features | ||
| Touchscreen | Yes | Yes |
| Hepa Filter | No | |
| SD Card | Yes,SD-Card | |
| Filament Runout Sensor | Yes | Yes |
| Powerloss Fail Safe | Yes | Yes |
| System | ||
| Weight | 14.4 kg | 26.7 lb / 12.1 kg |
| Dimensions | 410 mm x 405 mm x 452 mm | 16.7 x 18.1 x 22.4" / 425 x 460 x 570 mm |
| Voltage | AC: 110 V - 220 V, (50 / 60 Hz) | 100 to 240 VAC, 50 / 60 Hz |
| Total Weight | 14.4 kg | 26.7 lb / 12.1 kg |