Anycubic Mega S vs Anycubic Mega Zero 2.0
When you compare the Anycubic Mega Zero 2.0 to the Anycubic Mega S you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Specs comparison between the two Printers
| Anycubic Mega Zero 2.0 | Anycubic Mega S | |
|---|---|---|
| Overview | ||
| Extruder Type | Bowden | Bowden |
| Print Technology | Fused Deposition Modeling | Fused Deposition Modeling |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | 1.75 mm |
| Build Plate Material | Sheet Metal | |
| Max Power Consumption | 360 W | |
| Build Area | 220 mm x 220 mm x 250 mm | 210 mm x 210 mm x 205 mm |
| Build Plate Attachment | magnetic | |
| Ambient Operating Temperature | 8°C - 40°C | 8°C - 40°C |
| Max. Nozzle Temperature | 255 ºC | 275 ºC |
| Build Volume | 220 mm x 220 mm x 250 mm | 210 mm x 210 mm x 205 mm |
| Number of Extruders | 1 | 1 |
| Build Plate Leveling System | manual Leveling | manual Leveling |
| Open Filament System | Yes | Yes |
| Max Build Plate Temperature | 110 ºC | 100 ºC |
| Layer Height | 0.1 - 0.4 mm | |
| Total Mass Overall Dimensions | 505 mm x 431 mm x 607 mm | 410 mm x 405 mm x 452 mm |
| Resolution | 100 µm | |
| Build Chamber During Process | open | open |
| Max Recommended Printing Speed | 60 mm/s | 60 mm/s |
| Connectivity | ||
| USB Port | Yes | Yes |
| Features | ||
| Build Chamber Heater | Yes | |
| Touchscreen | No | Yes |
| Hepa Filter | No | No |
| SD Card | Yes,SD-Card | |
| Filament Runout Sensor | Yes | |
| Powerloss Fail Safe | Yes | Yes |
| System | ||
| Weight | 7 kg | 14.4 kg |
| Dimensions | 505 mm x 431 mm x 607 mm | 410 mm x 405 mm x 452 mm |
| Voltage | AC: 100 V - 240 V, (50 / 60 Hz) | AC: 110 V - 220 V, (50 / 60 Hz) |
| Total Weight | 7 kg | 14.4 kg |