Anycubic Chiron vs Creality CR-10-S5
When you compare the Anycubic Chiron to the Creality CR-10-S5 you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Specs comparison between the two Printers
| Anycubic Chiron | Creality CR-10-S5 | |
|---|---|---|
| Overview | ||
| Extruder Type | Bowden | |
| Print Technology | Fused Deposition Modeling | |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | |
| Build Plate Material | tempered glass | |
| Max Power Consumption | 360 W | |
| Build Area | 400 mm x 400 mm x 450 mm | 500 mm x 500 mm x 500 mm |
| Build Plate Attachment | clamp | |
| Ambient Operating Temperature | 8°C - 40°C | 5°C - 45°C |
| Internal Memory | ||
| Max. Nozzle Temperature | 260 ºC | 250 ºC |
| Build Volume | 400 mm x 400 mm x 450 mm | |
| Number of Extruders | 1 | 1 |
| Build Plate Leveling System | Automatic Bed Leveling | manual Leveling |
| Build Plate Surface | Ultrabase Glass | |
| Open Filament System | Yes | Yes |
| Max Build Plate Temperature | 100 ºC | 60 ºC |
| Usable Nozzle Type | MK8 | |
| Total Mass Overall Dimensions | 651 mm x 612 mm x 720 mm | |
| Resolution | 50 - 300 µm | 0.1 mm |
| Build Chamber During Process | open | open |
| Max Recommended Printing Speed | 100 mm/s | 100 mm/s |
| Connectivity | ||
| USB Port | Yes | Yes |
| WLAN | No | |
| Features | ||
| Touchscreen | Yes | No |
| Hepa Filter | No | No |
| SD Card | Yes,SD-Card | Yes,micro-SD |
| Filament Runout Sensor | Yes | Yes |
| Powerloss Fail Safe | Yes | |
| System | ||
| Weight | 15 kg | 22.8 kg |
| Dimensions | 651 mm x 612 mm x 720 mm | |
| Voltage | AC: 110 V - 220 V, (50 / 60 Hz) | AC: 110 V / 230 V (50 Hz) |
| Total Weight | 15 kg | |