Voxelab Aquila vs Artillery Sidewinder X2 SW-X2
When you compare the Voxelab Aquila to the Artillery Sidewinder X2 SW-X2 you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Voxelab Aquila3.8
Based on 2 reviews
VS
Specs comparison between the two Printers
| Voxelab Aquila | Artillery Sidewinder X2 SW-X2 | |
|---|---|---|
| Overview | ||
| Extruder Type | Bowden | direct drive |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | 1.75 mm |
| Build Plate Material | Carbon crystal silicon glass plate | Ceramic Glass |
| Max Power Consumption | 350 W | 700 W |
| Build Area | 220 mm x 220 mm x 250 mm | 300 mm x 300 mm x 400 mm |
| Build Plate Attachment | clamp | clamp |
| Ambient Operating Temperature | 15°C - 30°C | |
| Internal Memory | ||
| Max. Nozzle Temperature | 250 ºC | 240 ºC |
| Number of Extruders | 1 | 1 |
| Build Plate Leveling System | manual Leveling | BL-Touch |
| Open Filament System | Yes | Yes |
| Max Build Plate Temperature | 100 ºC | 130 ºC |
| Layer Height | 0.1 - 0.4 mm | 0.1 - 0.35 mm |
| Usable Nozzle Type | Volcano | |
| Total Mass Overall Dimensions | 475 mm x 480 mm x 473 mm | 550 mm x 405 mm x 870 mm |
| Resolution | 0.2 mm | |
| Build Chamber During Process | open | open |
| Max Recommended Printing Speed | 180 mm/s | 150 mm/s |
| Connectivity | ||
| USB Port | Yes | |
| WLAN | No | |
| Features | ||
| Touchscreen | No | Yes |
| Hepa Filter | No | No |
| SD Card | Yes,micro-SD | Yes,micro-SD |
| Filament Runout Sensor | Yes | |
| Powerloss Fail Safe | Yes | Yes |
| System | ||
| Weight | 8.2 kg | 13 kg |
| Dimensions | 475 mm x 480 mm x 473 mm | 550 mm x 405 mm x 870 mm |
| Voltage | AC: 115 V / 230 V (50/60 Hz) | AC: 100 V - 240 V (50-60 Hz) |
| Total Weight | 8.2 kg | 13 kg |
