About Makerbot
MakerBot SKETCH
Usable Filament Diameter
1.75 mm
Build Area
220 mm x 200 mm x 250 mm
Layer Height
100 to 400 micron / 0.1 to 0.4 mm
MakerBot SKETCH Specification
| Overview It uses Fused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM) 3d printer technology. | |||
|---|---|---|---|
Print Technology | Fused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM) | ||
| Performance The printer can use 400 micron / 0.4 mm (Included) nozzles. The usable filament diameter is a 1.75 mm diameter. There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. You'll get a 220 mm x 200 mm x 250 mm in the MakerBot SKETCH, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Area | 220 mm x 200 mm x 250 mm | ||
Ambient Operating Temperature | 15ºC - 30ºC | ||
Build Volume | 5.9 x 5.9 x 5.9" / 15.0 x 14.99 x 15.0 cm | ||
Number of Extruders | 1 | ||
Filament Chamber Closed | Yes | ||
Layer Height | 100 to 400 micron / 0.1 to 0.4 mm | ||
Build Chamber During Process | Enclosed | ||
| Connectivity | |||
Cloud Control | Yes | ||
USB Port | Yes | ||
Ethernet Port | Yes | ||
WLAN | Yes | ||
| Features | |||
Touchscreen | Yes | ||
Hepa Filter | Particle Filter | ||
Filament Runout Sensor | Yes | ||
| System | |||
Weight | 26 lb / 11.8 kg | ||
Dimensions | 16.6 x 17 x 14.4" / 42.16 x 43.18 x 36.58 cm | ||
Voltage | 100 to 240 VAC, 50 / 60 Hz | ||
Total Weight | 26 lb / 11.8 kg | ||
