Flashforge Finder vs Original Prusa i3 MK4
When you compare the Flashforge Finder to the Original Prusa i3 MK4 you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Flashforge Finder3.7
Based on 5 reviews
VS
Specs comparison between the two Printers
| Flashforge Finder | Original Prusa i3 MK4 | |
|---|---|---|
| Overview | ||
| Extruder Type | direct drive | |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | 1.75 mm |
| Build Plate Material | Flexible Steel Plate | |
| Max Power Consumption | 65 W | 120 W |
| Build Area | 140 mm x 140 mm 140 mm | 250 x 210 x 220 mm |
| Build Plate Attachment | clamp | magnetic |
| Ambient Operating Temperature | 15°C - 30°C | |
| Internal Memory | Yes,8 Gbyte | |
| Max. Nozzle Temperature | 240 ºC | 300 °C |
| Build Volume | 140 mm x 140 mm 140 mm | |
| Number of Extruders | 1 | 1 |
| Build Plate Leveling System | Assisted Leveling | Mesh Bed Levelling |
| Filament Chamber Closed | Yes | |
| Open Filament System | Yes | |
| Max Build Plate Temperature | 120 °C | |
| Layer Height | 0.05 - 0.30 mm | |
| Total Mass Overall Dimensions | 420 mm x 420 mm x 420 mm | 500 mm x 550 mm x 400 mm |
| Resolution | 100 - 400 µm | |
| Build Chamber During Process | closed | Open |
| Resin Display Type | monochrome UI | |
| Max Recommended Printing Speed | 100 mm/s | |
| Connectivity | ||
| Cloud Control | Yes | |
| USB Port | Yes | Yes |
| Ethernet Port | Yes | Yes |
| WLAN | Yes | Yes |
| Features | ||
| Touchscreen | Yes | No |
| Hepa Filter | No | No |
| Filament Runout Sensor | Yes | |
| System | ||
| Weight | 11 kg | 7 kg |
| Dimensions | 420 mm x 420 mm x 420 mm | 500 mm x 550 mm x 400 mm |
| Voltage | AC: 100 V - 240 V, (47 - 63 Hz) | |
| Total Weight | 11 kg | 7 kg |