Flashforge Finder vs FlashForge Inventor
When you compare the FlashForge Inventor to the Flashforge Finder you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
VS
Flashforge Finder3.7
Based on 5 reviews
Specs comparison between the two Printers
| FlashForge Inventor | Flashforge Finder | |
|---|---|---|
| Performance | ||
| Usable Filament Diameter | 1.75 mm | 1.75 mm |
| Build Plate Material | Flexible Steel Plate | |
| Max Power Consumption | 350 W | 65 W |
| Build Area | 230 mm x 150 mm x 160 mm | 140 mm x 140 mm 140 mm |
| Build Plate Attachment | clamp | |
| Ambient Operating Temperature | 15°C - 30°C | |
| Internal Memory | Yes,8 Gbyte | |
| Max. Nozzle Temperature | 240 ºC | |
| Build Volume | 9.1 x 5.91 x 6.3" / 23.0 x 15 x 16.0 cm | 140 mm x 140 mm 140 mm |
| Number of Extruders | 2 | 1 |
| Build Plate Leveling System | Assisted Leveling | |
| Filament Chamber Closed | Yes | Yes |
| Open Filament System | Yes | |
| Layer Height | XY Axis: 50 micron / 0.05 mm Z Axis: 2.5 micron / 0.0025 mm | |
| Usable Nozzle Type | 400 micron / 0.4 mm (Included) | |
| Total Mass Overall Dimensions | 420 mm x 420 mm x 420 mm | |
| Resolution | XY Axis: 11 micron / 0.011 mm | 100 - 400 µm |
| Build Chamber During Process | Enclosed | closed |
| Max Recommended Printing Speed | 100 mm/s | |
| Connectivity | ||
| Cloud Control | Yes | |
| USB Port | Yes | Yes |
| Ethernet Port | Yes | |
| WLAN | Yes | Yes |
| Features | ||
| Touchscreen | Yes | Yes |
| Hepa Filter | No | |
| Filament Runout Sensor | Yes | |
| Camera | Yes | |
| Powerloss Fail Safe | Yes | |
| System | ||
| Weight | 32.6 lb / 14.8 kg | 11 kg |
| Dimensions | 19.09 x 13.54 x 15.04" / 485 x 344 x 382 mm | 420 mm x 420 mm x 420 mm |
| Voltage | 100 to 240 VAC, 50 / 60 Hz | AC: 100 V - 240 V, (47 - 63 Hz) |
| Total Weight | 32.6 lb / 14.8 kg | 11 kg |