When you compare the Flashforge Finder to the Flashforge Creator 3 you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
| Flashforge Finder | Flashforge Creator 3 | |
|---|---|---|
| Overview | ||
| Print Technology | Fused Filament Fabrication | |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | 1.75 mm |
| Build Plate Material | Flexible Steel Plate | Flexible Steel Plate |
| Max Power Consumption | 65 W | 500 W |
| Build Area | 140 mm x 140 mm 140 mm | 300 mm x 250 mm x 200 mm |
| Build Plate Attachment | clamp | clamp |
| Ambient Operating Temperature | 15°C - 30°C | 18°C - 30°C |
| Internal Memory | Yes,8 Gbyte | Yes,8 Gbyte |
| Max. Nozzle Temperature | 240 ºC | 300 ºC |
| Build Volume | 140 mm x 140 mm 140 mm | 300 mm x 250 mm x 200 mm |
| Number of Extruders | 1 | 2 |
| Build Plate Leveling System | Assisted Leveling | Automatic Bed Leveling |
| Filament Chamber Closed | Yes | Yes |
| Build Plate Surface | carbon fiber sheet, removable | |
| Open Filament System | Yes | Yes |
| Max Build Plate Temperature | 120 ºC | |
| Extruder Construction Type Dual | IDEX - Independent Dual Extruders | |
| Total Mass Overall Dimensions | 420 mm x 420 mm x 420 mm | 627 mm x 485 mm x 615 mm |
| Resolution | 100 - 400 µm | 50 - 400 µm |
| Build Chamber During Process | closed | closed |
| Max Recommended Printing Speed | 100 mm/s | 150 mm/s |
| Connectivity | ||
| Cloud Control | Yes | Yes |
| USB Port | Yes | Yes |
| Ethernet Port | Yes | Yes |
| WLAN | Yes | Yes |
| Features | ||
| Door Sensor | Yes | |
| Build Chamber Heater | Yes | |
| Touchscreen | Yes | Yes |
| Hepa Filter | No | Yes |
| Filament Runout Sensor | Yes | Yes |
| Camera | Yes | |
| Powerloss Fail Safe | Yes | |
| System | ||
| Weight | 11 kg | 40 kg |
| Dimensions | 420 mm x 420 mm x 420 mm | 627 mm x 485 mm x 615 mm |
| Voltage | AC: 100 V - 240 V, (47 - 63 Hz) | AC: 100 V - 240 V, (48 - 63 Hz) |
| Total Weight | 11 kg | 52 kg |