Flashforge Creator 3 vs DWS XPRO S
When you compare the Flashforge Creator 3 to the DWS XPRO S you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Specs comparison between the two Printers
| Flashforge Creator 3 | DWS XPRO S | |
|---|---|---|
| Overview | ||
| Print Technology | Fused Filament Fabrication | Laser Stereolithography |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | |
| Build Plate Material | Flexible Steel Plate | |
| Max Power Consumption | 500 W | 500 W |
| Build Area | 300 mm x 250 mm x 200 mm | 300 mm x 300 mm x 300 mm |
| Build Plate Attachment | clamp | |
| Ambient Operating Temperature | 18°C - 30°C | 20°C - 25°C |
| Internal Memory | Yes,8 Gbyte | |
| Resin UV Light Type | Solid State BlueEdge | |
| Max. Nozzle Temperature | 300 ºC | |
| Build Volume | 300 mm x 250 mm x 200 mm | |
| Number of Extruders | 2 | |
| Build Plate Leveling System | Automatic Bed Leveling | |
| Filament Chamber Closed | Yes | |
| Build Plate Surface | carbon fiber sheet, removable | |
| Open Filament System | Yes | |
| Max Build Plate Temperature | 120 ºC | |
| Layer Height | 0.01 - 0.1 mm | |
| Extruder Construction Type Dual | IDEX - Independent Dual Extruders | |
| Total Mass Overall Dimensions | 627 mm x 485 mm x 615 mm | 704 mm x 1446 mm x 2048 mm |
| Resolution | 50 - 400 µm | |
| Build Chamber During Process | closed | closed |
| Max Recommended Printing Speed | 150 mm/s | |
| Connectivity | ||
| Cloud Control | Yes | |
| USB Port | Yes | Yes |
| Ethernet Port | Yes | Yes |
| WLAN | Yes | |
| Features | ||
| Door Sensor | Yes | |
| Build Chamber Heater | Yes | |
| Touchscreen | Yes | No |
| Hepa Filter | Yes | No |
| Filament Runout Sensor | Yes | |
| Camera | Yes | |
| Powerloss Fail Safe | Yes | |
| System | ||
| Weight | 40 kg | 500 kg |
| Dimensions | 627 mm x 485 mm x 615 mm | 704 mm x 1446 mm x 2048 mm |
| Voltage | AC: 100 V - 240 V, (48 - 63 Hz) | AC: 230 V, (50 Hz) |
| Total Weight | 52 kg | 500 kg |