About Dremel Digilab
Dremel 3D Digilab 3D45-EDU
Usable Filament Diameter
1.75 mm
Build Area
254 mm x 152 mm x 170 mm
Layer Height
Z Axis: 300 micron / 0.3 mm
Dremel 3D Digilab 3D45-EDU Specification
| Overview It uses Fused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM) 3d printer technology. There's a direct extruder inside. This direct drive extruder means that the extruder is mounted on the printhead. This then pushes the filament directly into, and out of, the hot end and into your print. | |||
|---|---|---|---|
Extruder Type | direct | ||
Print Technology | Fused Filament Fabrication (FFF), Marketed as Fused Deposition Modeling (FDM) | ||
| Performance The printer can use 400 micron / 0.4 mm (Included) nozzles. The usable filament diameter is a 1.75 mm diameter. There are 1 extruders in the printer. Having more than one extruder attached to the printer can help you print material faster, as the printer can focus on multiple elements at once. You'll get a 254 mm x 152 mm x 170 mm in the Dremel 3D Digilab 3D45-EDU, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. | |||
Usable Filament Diameter | 1.75 mm | ||
Build Area | 254 mm x 152 mm x 170 mm | ||
Ambient Operating Temperature | 16°C - 29°C | ||
Max. Nozzle Temperature | 536°F / 280°C | ||
Build Volume | 10 x 6 x 6.7" / 25.4 x 15.24 x 17.0 cm | ||
Number of Extruders | 1 | ||
Build Plate Leveling System | Manual Leveling | ||
Filament Chamber Closed | Yes | ||
Max Build Plate Temperature | 212°F / 100°C | ||
Layer Height | Z Axis: 300 micron / 0.3 mm | ||
Build Chamber During Process | Enclosed | ||
| Connectivity | |||
USB Port | Yes | ||
Ethernet Port | Yes | ||
WLAN | Yes | ||
| Features | |||
Touchscreen | Yes | ||
| System | |||
Weight | 42.8 lb / 19.4 kg (without Filament) | ||
Dimensions | 20.25 x 16 x 15.9" / 51.44 x 40.64 x 40.39 cm | ||
Voltage | 100 to 240 VAC, 50 / 60 Hz at 0.85 to 2.3 A | ||
Total Weight | 42.8 lb / 19.4 kg (without Filament) | ||
