Anycubic Photon vs Original Prusa i3 MK3S+
When you compare the Anycubic Photon to the Original Prusa i3 MK3S+ you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Specs comparison between the two Printers
| Anycubic Photon | Original Prusa i3 MK3S+ | |
|---|---|---|
| Overview | ||
| Extruder Type | direct drive | |
| Print Technology | UV LCD | |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | |
| Max Power Consumption | 40 W | 120 W |
| Build Area | 115 mm x 65 mm x 155 mm | 210 mm x 210 mm x 250 mm |
| Resin UV Wavelength | 405 nm | |
| Resin Display Resolution | 47 µm | |
| Internal Memory | ||
| Resin UV Light Type | UV light with reflector | |
| Max. Nozzle Temperature | 300 ºC | |
| Build Volume | 210 mm x 210 mm x 250 mm | |
| Number of Extruders | 1 | |
| Build Plate Leveling System | manual Leveling | Mesh Bed Levelling |
| Max Build Plate Temperature | 120 ºC | |
| Layer Height | 0.025 - 0.1 mm | 0.05 - 0.35 mm |
| Usable Nozzle Type | ||
| Total Mass Overall Dimensions | 220 mm x 200 mm x 400 mm | 400 mm x 500 mm x 550 mm |
| Resolution | 47 µm | |
| Resin Display Resolution Y | 1440 pixel | |
| Resin Display Resolution X | 2560 pixel | |
| Build Chamber During Process | Open or Closed | open |
| Resin Display Type | LCD | monochrome LCD |
| Max Recommended Printing Speed | 20 mm/h | |
| Connectivity | ||
| USB Port | Yes | Yes |
| Ethernet Port | Yes | |
| WLAN | No | Yes |
| Features | ||
| Touchscreen | Yes | No |
| Hepa Filter | Yes | No |
| SD Card | Yes,SD-Card | |
| Filament Runout Sensor | Yes | |
| System | ||
| Weight | 6.6 kg | 7 kg |
| Dimensions | 220 mm x 200 mm x 400 mm | 400 mm x 500 mm x 550 mm |
| Voltage | AC: 100 V - 240 V, 2 A (50/60 Hz) | |
| Total Weight | 6.6 kg | 7 kg |