Anycubic Photon S vs Monoprice MP10
When you compare the Anycubic Photon S to the Monoprice MP10 you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Anycubic Photon S4.1
Based on 6 reviews
Lowest prices
VS
Specs comparison between the two Printers
| Anycubic Photon S | Monoprice MP10 | |
|---|---|---|
| Overview | ||
| Extruder Type | Bowden | |
| Print Technology | UV LCD | |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | |
| Build Plate Material | Flexible Steel Plate | |
| Max Power Consumption | 50 W | |
| Build Area | 115 mm x 65 mm x 165 mm | 300 mm x 300 mm x 400 mm |
| Build Plate Attachment | magnetic | |
| Resin UV Wavelength | 405 nm | |
| Resin Display Resolution | 47 µm | |
| Internal Memory | ||
| Resin UV Light Type | Matrix UV Light Source | |
| Max. Nozzle Temperature | 280 ºC | |
| Build Plate Leveling System | manual Leveling | Assisted Leveling |
| Open Filament System | Yes | |
| Max Build Plate Temperature | 110 ºC | |
| Layer Height | 0,025 - 0,1 mm | |
| Usable Nozzle Type | ||
| Total Mass Overall Dimensions | 501 mm x 622 mm x 622 mm | |
| Resolution | 47 µm | 50 - 300 µm |
| Resin Display Resolution Y | 1440 pixel | |
| Resin Display Resolution X | 2560 pixel | |
| Build Chamber During Process | Open or Closed | open |
| Resin Display Type | LCD | |
| Max Recommended Printing Speed | 100 mm/s | |
| Connectivity | ||
| USB Port | Yes | Yes |
| WLAN | Yes | |
| Features | ||
| Build Chamber Heater | Yes | |
| Touchscreen | Yes | Yes |
| Hepa Filter | Yes | No |
| SD Card | Yes,Micro-SD | |
| Filament Runout Sensor | Yes | |
| Powerloss Fail Safe | Yes | |
| System | ||
| Weight | 9.5 kg | 12.5 kg |
| Dimensions | 501 mm x 622 mm x 622 mm | |
| Voltage | AC: 110 V - 220 V, (50 / 60 Hz) | |
| Total Weight | 9.5 kg | 12.5 kg |