Anycubic Mega X vs Creality CR-10S Pro v2
When you compare the Anycubic Mega X to the Creality CR-10S Pro v2 you can see which Printer is better. Let's take a look of the comparison, and see which model of Printer out ontop.
Specs comparison between the two Printers
| Anycubic Mega X | Creality CR-10S Pro v2 | |
|---|---|---|
| Overview | ||
| Extruder Type | Bowden | Bowden Bondtech dual drive gears |
| Print Technology | Fused Deposition Modeling | |
| Performance | ||
| Usable Filament Diameter | 1.75 mm | 1.75 mm |
| Build Plate Material | Ultrabase glass | Aluminum plate |
| Max Power Consumption | 350 W | 500 W |
| Build Area | 300 mm x 300 mm x 305 mm | 300 mm x 300 mm x 400 mm |
| Build Plate Attachment | clamp | clamp |
| Ambient Operating Temperature | 8°C - 40°C | 5°C - 45°C |
| Internal Memory | ||
| Max. Nozzle Temperature | 250 ºC | 250 ºC |
| Build Volume | 300 mm x 300 mm x 305 mm | |
| Number of Extruders | 1 | 1 |
| Build Plate Leveling System | manual Leveling | BL-Touch |
| Build Plate Surface | Ultrabase Glass | adhesive sheet |
| Open Filament System | Yes | Yes |
| Max Build Plate Temperature | 90 ºC | 110 ºC |
| Layer Height | 0.05 - 0.3 mm | 0.1 - 0.4 mm |
| Usable Nozzle Type | RepRap M6 1,75mm | Cr-10S Pro |
| Total Mass Overall Dimensions | 500 mm x 500 mm x 553 mm | 547 mm x 485 mm x 800 mm |
| Resolution | 50 - 300 µm, 0.01 mm | 0.1 mm |
| Build Chamber During Process | open | open |
| Max Recommended Printing Speed | 60 mm/s, 100 mm/s | 180 mm/s |
| Connectivity | ||
| USB Port | Yes | Yes |
| WLAN | No | No |
| Features | ||
| Touchscreen | No, Yes | Yes |
| Hepa Filter | No | No |
| SD Card | Yes,SD-Card, Yes,SD-Card | Yes,micro-SD |
| Filament Runout Sensor | Yes | Yes |
| Powerloss Fail Safe | Yes | Yes |
| System | ||
| Weight | 19 kg, 14 kg | 13.9 kg |
| Dimensions | 500 mm x 500 mm x 553 mm | 547 mm x 485 mm x 800 mm |
| Total Weight | 19 kg, 14 kg | 13.9 kg |