About 3D Systems
3D Systems Figure 4 Jewelry
Max Recommended Printing Speed
16 mm/h
Build Area
125 mm x 70 mm x 196 mm
Product Overview
3D Systems Figure 4 Jewelry Specification
| Overview It uses Non-contact membrane Figure 4 technology 3d printer technology. | |||
|---|---|---|---|
Print Technology | Non-contact membrane Figure 4 technology | ||
| Performance The recommended maximum printing speed is 16 mm/h. This printing speed can affect the quality of the print, so make sure this speed falls within ranges you would like. You'll get a 125 mm x 70 mm x 196 mm in the 3D Systems Figure 4 Jewelry, so make sure everything you want to print fits in this. You can make do by making your print in pieces, and then assembling, however, sometimes you'll just need a larger build area. | |||
Build Area | 125 mm x 70 mm x 196 mm | ||
Resin UV Wavelength | 405 nm | ||
Ambient Operating Temperature | 18°C - 28°C | ||
Build Volume | 125 mm x 70 mm x 196 mm | ||
Total Mass Overall Dimensions | 426 mm x 490 mm x 97 mm | ||
Resin Display Resolution Y | 1080 pixel | ||
Resin Display Resolution X | 1920 pixel | ||
Build Chamber During Process | closed | ||
Max Recommended Printing Speed | 16 mm/h | ||
| Connectivity | |||
Cloud Control | Yes | ||
Ethernet Port | Yes | ||
| System | |||
Weight | 34.5 kg | ||
Dimensions | 426 mm x 490 mm x 97 mm | ||
Voltage | AC: 100 V - 240 V, 4 A (50 / 60 Hz) | ||
Total Weight | 34.5 kg | ||